Laser Level Transmitters

	Model LM200
	The LM200 may be used for Distance measurement as well as Liquids
	& Solids level measurement. The optical pulsed laser signal has a
	wavelength of 0.001mm resulting in a very narrow beam width 
	making the transmitter easy to install & target.

	-Range 0.3 to 60m
	-Can penetrate Glass viewing windows
	-Beam width at 10m < 35mm
	-4-20mA 
	-Flanged or Bracket support
	-Accurate to +/- 30mm
	-Accessories Include dust tubes & purge ports
	-Operating Temperature range -30°C to +65°C
	 -Class 1 "Eye Safe" Laser

				    Click here to download LM200 Data Sheet

	Model LM80
	The SS50 is a cost effective laser measurement system designed 
	for. Distance measurement as well as Liquids & Solids level
	measurement, over the range 0 - 30m. The optical pulsed laser 
	signal has a wavelength of  0.001mm resulting in a very narrow 
	beam width making the transmitter easy to install & target.

	-0.3 to 30m
	-Can penetrate Glass viewing windows
	-Beam width at 10m < 35mm
	-4-20mA / 2 SPST relay
	-Flanged or Bracket support
	-Accurate to 30mm
	-Accessories Include dust tubes & purge ports
	-Operating Temperature range -30°C to +65°C
				    -Class 1 "Eye Safe" Laser

				    Click here to download LM80 Data Sheet

	Model LM4C

	The LM4C is a high power Laser designed for Distance measurement 
	and positioning at up to 350m range.

	-0.5 to 350m
	-Beam width at 10m < 35mm
	-4-20mA 
	-Bracket support
	-Accurate to +/-  200mm at 350m
	-Accessories Include dust tubes & purge ports
	-Operating Temperature range -40°C to +65°C
	-Class 1 "Eye Safe" Laser
	
	Click here to download LM4C Data Sheet

	Model LM2D
	LM2D is a laser based, non-contact volumetric belt conveyer scanner
	for flow measurement of dry products on conveyer belts. LM2D is a 
	non-contact direct replacement of belt scales and can be installed 
	quick and conveniently, without stopping the belt. The instrument 
	features a non-contact laser scanning head and integral Doppler 
	Radar speed sensor. LM2D does material profile scanning and speed
	measurement in a single unit with output of material flow and additional
	totalizer function of mass throughput calculation. 	
	
	-Load Cell Replacement Alternative 
	-Totalizer for Real Time Throughput Mass Calculation 
	-Integral Non-contact Belt Speed Sensor 

	Click here to download LM2D Data Sheet

	Model LM3D
	LM3D is laser based, non-contact three dimensional scanner profiler 
	for volumetric measurement of dry products in silos and stock piles. 
	The instrumnent features a rotating laser scanning head, which performs
	multiple points measurement on the scanned, uneven surface. After the 
	scan, a three dimensional image of the measured surface is created and
	the volume is calculated based on the image. When LM3D does not perform
	3D scan, it can work as a single point laser level transmitter. The scan
	can be initiated on demand or programmed as an automatic function.	
	
	-Diagonal Measuring Range: 5ft/1.5m to 115ft/35m 
	-Non-contact Volumetric Three Dimensional Scanner  
	-Totalizer for Real Time Mass Calculation 
	
	Click here to download LM3D Data Sheet