AT200 Magnetostrictive transmitters
The AT200 is a magnetostrictive transmitter (see AT100) that is mounted on the outside of a magnetic level gauge. The magnets inside the level gauge float activate the transmitter through the wall of the chamber. The transmitter is therefore completely non-contact and can be mounted at the top or bottom of the chamber.
The transmitter can be left inside any chamber lagging or heat tracing and for high temperature applications we can add a 90° bend in the rod to remote mount the electronics.
- ATEX Exd / Exia and SIL2 rated
- Accuracy of +/- 1mm over 10 m length
- Process temperature from -200 to + 400°C
- Any length
- Bulk level and interface level
- Completely non-contact